High intensity workload 240W

Short Description:

NPUT SPEC.
Input Voltage Range: 100-240Vac
Input Frequency: 50/60Hz
Input Current Range: 3.5A
AC Leakage Current: ≤0.25mA


Product Detail

Product Tags

Basic Parameter

Ripple Noise: ≤200mVp
Hold-up Time: 5 sec. min. @230Vac input, full load
Turn-on Delay: 3 sec. max. @115Vac
Line Regulation: ±2%
Load Regulation: ±5%

ENVIRONMENTAL SPEC.
Operating Temperature: 0~40 ºC
Storage Temperature: -20~80 ºC
Relative Humidity: 10%~90%
Altitude during operation: 5000M

6372610309575301352938278

Specification parameters

2PIN / 3PIN

Model Output  Voltage(V) Output   Current (A) Max   Power(W)
AK240WG Series   (Class I+II) 12.0-55V 0.01-17 240

Transport package

Transport packaging involves multiple departments and multiple operations. It is for the purpose of strengthening transportation and protecting products. To a certain extent, the quality of packaging reflects the development level of a country's comprehensive productivity.

Basic Information

Protection ability Waterproof, moisture-proof, insect-proof, anti-corrosion, anti-theft

Basic requirements have sufficient strength, rigidity and stability

What is ripple (noise)

The reason for the formation of ripple is more complicated. Simply put, when alternating current is converted to direct current through rectification, stabilization, etc., there will inevitably be some alternating current components in the direct current. This alternating current component superimposed on the direct current is called ripple.

If the ripple is large, it will increase the filtering pressure of the hardware, such as explosion of capacitors, hard disk damage, and even serious damage to the board.

Basic Content

FEATURES
1 year warranty service
Efficiency Level: VI
Surge: 1-4KV
ESD: 4KV/8KV
Dielectric strength Hi-Pot: 3750Vac/1 minutes
Drop test: 1 Corner, 3 Edges, 6 Surfaces each once. Drop on the cement plane, Height: 100cm

GENERAL SPEC.

OVP: The power supply will auto recovered when faults removed
SCP: Output can be shorted without damage, and auto recovery
OTP: No damage, no deformation
OCP: The power supply will be auto recovered after over current faults removed
MTBF: 50Khrs min. at 25 ºC at full load Approx.
EMC: FCC Class B, CISPR22 Class B, GB17625, EN55032, EN55014, EN55015, EN55020, EN55024, EN61000-3-2, EN61000-3-3
Weight: Max. 0.401kg, 40pcs/Box

SAFETY

62368: UL/CUL GS CE CB SAA PSE CCC

Quality

What certifications have you passed?

The company possess ISO9001 and ISO14001 certificates.

How about the production process?

Established and improved the work post responsibility system, formulate or revise and strictly implement all operation procedures in time, and observe the production discipline.

How about after-sales maintenance?

Organize the maintenance work of the equipment and keep the technical condition of the equipment in good condition.  The quality standard to be achieved by the repaired equipment.

Company Scenario


  • Previous:
  • Next:

  • Write your message here and send it to us