BSMI certification / MIC certification 18W

Short Description:

NPUT SPEC.
Input Voltage Range: 100-240Vac
Input Frequency: 50/60Hz
Input Current Range: 3.5A
AC Leakage Current: ≤0.25mA


Product Detail

Product Tags

Basic Parameter

INPUT SPEC.

Input Voltage Range: 100-240Vac

Input Frequency: 50/60Hz

Input Current Range: 0.5A

AC Leakage Current: ≤0.25mA

Ripple Noise: ≤200mVp

Hold-up Time: 5 sec. min. @230Vac input, full load

Turn-on Delay: 3 sec. max. @115Vac

Line Regulation: ±2%

Load Regulation: ±5%

18_3

Specification parameters

18W AU plug / 18W US plug / 18W EU plug / 18W UK plug / 18W CN plug / 18W interchangeable plug

Model Output    Voltage (V) Output   Current (A) Max       Power (W)
AK18WG Series     (Class II) 5.0-7.5 0.01-3.0 15
7.6-10.9 0.01-2.37 18
11.0-15.9 0.01-1.63 18
16.0-24.0 0.01-1.0 18

BSMI certification:

All products sold in the Taiwan market must pass inspection and certification to obtain the BSMI certification mark.

MIC certification:

Mic certification is a Japanese government agency that regulates radio frequency equipment. The production and sales of wireless devices in Japan must comply with the technical regulations approved by the Ministry of Internal Affairs and Communications of Japan. SGS has established an MOU in cooperation with Japan's RFT and German MC to provide you with convenient services to enter the Japanese market.

NCC certification:

NCC stipulates that all telecommunications terminal equipment, low-power radio frequency motors and telecommunications control equipment must be certified before they can be sold on the market.

AO (1)

Australian certigicates with wire 18w

AO (3)

Australian certigicates with wire 18w

AO (4)

Australian certigicates with wire 18w

EN (1)

Britain certigicates with wire 18w

EN (2)

Britain certigicates with wire 18w

EN (3)

Britain certigicates with wire 18w

OU (1)

Britain certigicates with wire 18w

OU (2)

Britain certigicates with wire 18w

OU (3)

Britain certigicates with wire 18w

CH (2)

China certigicates with wire 18w

CH (1)

China certigicates with wire 18w

CH (3)

China certigicates with wire 18w

Basic Content

ENVIRONMENTAL SPEC.

Operating Temperature: 0~40 ºC

Storage Temperature: -20~80 ºC

Relative Humidity: 10%~90%

Altitude during operation: 5000M

FEATURES
1 year warranty service
Efficiency Level: VI
Surge: 1-4KV
ESD: 4KV/8KV
Dielectric strength Hi-Pot: 3750Vac/1 minutes
Drop test: 1 Corner, 3 Edges, 6 Surfaces each once. Drop on the cement plane, Height: 100cm

GENERAL SPEC.

OVP: The power supply will auto recovered when faults removed
SCP: Output can be shorted without damage, and auto recovery
OTP: No damage, no deformation
OCP: The power supply will be auto recovered after over current faults removed
MTBF: 50Khrs min. at 25 ºC at full load Approx.
EMC: FCC Class B, CISPR22 Class B, GB17625, EN55032, EN55014, EN55015, EN55020, EN55024, EN61000-3-2, EN61000-3-3
Weight: Max. 0.401kg, 40pcs/Box

SAFETY

60950: CB CE GS SAA CCC UL CUL PSE KC

60065: CB CE GS

61558: CB CE GS PSE

Quality

Scope of application

The switching power supply is going to popular, miniaturized. The switching power supply will gradually replace all applications in life, and the application of low-power micro-switching power supply should be reflected in, digital display, smart meter, mobile phone charger, etc. At present, the state has vigorously promoted the construction of smart grids, and the requirements for electric energy meters have greatly improved, and the switching power supply will gradually replace the application of the transformer on the electric energy meter.
This wattage power supply and a variety of charger are the most widely used products in the house, such as charging, powering, powering, household LED lighting, fast-chargeable mobile phone charger outdoor Audio charging, tablet charging.

Company Scenario


  • Previous:
  • Next:

  • Write your message here and send it to us